para entendidos,el ocular erectriz de Meade da aumentos?

Avatar de Usuario
kothaar
Mensajes: 2269
Registrado: 19 Dic 2005, 00:00
Ubicación: ...pululando por el Norte

para entendidos,el ocular erectriz de Meade da aumentos?

Mensajepor kothaar » 26 Dic 2005, 17:32

tengo el Lidlscopio,y me asalta esa duda, sobre todo si alguien habla por experiencia,gracias :)

Avatar de Usuario
Piter
Mensajes: 246
Registrado: 19 Sep 2005, 23:00
Ubicación: Barcelona

Mensajepor Piter » 27 Dic 2005, 01:52

Si, a parte de enderezar la imagen, proporciona un aumento de 2,4 x


Saludos

Avatar de Usuario
mintaka
Moderador
Moderador
Mensajes: 5083
Registrado: 20 Dic 2004, 00:00
Ubicación: Fuenlabrada-Madrid
Contactar:

mintaka

Mensajepor mintaka » 27 Dic 2005, 05:04

¿de dónde has sacado esa información?, en la página de meade no comentan nada sobre ese aumento, aquí te dejo el enlace :

http://www.meade.com/catalog/etx/etx_accy.html

Te agradecería que me sacases de dudas a mí también.

Saludos :D .

Avatar de Usuario
mintaka
Moderador
Moderador
Mensajes: 5083
Registrado: 20 Dic 2004, 00:00
Ubicación: Fuenlabrada-Madrid
Contactar:

mintaka

Mensajepor mintaka » 27 Dic 2005, 07:08

....Como dice al Axioma de Allen:"Cuando todo falla hay que leer las instrucciones"...

#933 45° Erecting Prism: The ETX-60AT or ETX-70AT includes an internal optically-flat mir-ror
to reflect light to the telescope’s 90° astronomical observing position. In this position, the
telescope’s image is upright, but reversed left for right. For terrestrial observing with the ETX-60AT
or ETX-70AT, the #933 45° Erecting Prism (Fig. 23) results in a fully correctly oriented
image and a convenient 45° observing angle. The #933 Prism threads on to the telescope’s
photo port (16, Fig. 1). An eyepiece of any focal length (magnifying power) may be inserted into
the #933 Prism. The #933 includes an internal relay lens which increases each eyepiece power
by 2.4x. Note that the flip-mirror control (15, Fig. 1) must be in the “down” position (Fig. 2b) for
use with the #933 Prism.
IMPORTANT NOTE: In the most discriminating applications, such as in observing
delicate bird feather structure at long distance, the telescope’s internal, optically-flat
mirror yields a higher-resolution image than is possible with any prism, includ-ing
the #933. In these special cases, users are advised to observe with the eye-piece
in the standard 90° eyepiece-holder (15, Fig. 1), with the flip-mirror control in
the “up” position (Fig. 2a). This admonition applies only to situations requiring
extraordinarily high optical resolution where the observer’s eye is well-trained to
observe very fine detail. In typical terrestrial applications, no image differences
between the two eyepiece locations can generally be noted.
Fig 22: #827 Right-Angle
Viewfinder.
Fig 21: #64ST T-Adapter.

Saludos :D

Volver a “Telescopios e Instrumentos Ópticos”